78 Drives
5
Locate the correct bay for the drive, and slide the drive into the bay until it
clicks into place.
6
Replace the floppy drive (see "Replacing or Adding a Floppy Drive or
Media Card Reader in the Desktop Computer" on page 68).
7
Replace the optical drive (see "Replacing the Optical Drive in the Desktop
Computer" on page 60).
8
Check all connectors to ensure they are properly attached and firmly
seated.
9
Follow the procedure in "After Working on Your Computer" on page 17.
10
If the drive you just installed is the primary drive, insert a bootable disk
into your boot drive.
1 hard drive 2 drive bay label
3 hard drive bracket
To Next Page
Loading...
