Table 27. System setup optionsāBoot Configuration menuī(continued)
Boot Configuration
By default, the OFF option is disabled.
Enable Microsoft UEFI CA Enable or disable Microsoft UEFI Certificate Authority.
By default, the ON option is enabled.
CAUTION: Disabling Microsoft UEFI CA could render your system
being unable to boot. System graphics may not function, some
devices may not function properly. The system could become
unrecoverable.
Secure Boot Mode Change the secure boot mode options.
By default, the Deployed Mode option is enabled.
Expert Key Management
Enable Custom Mode Enable or disable custom mode.
By default, the OFF option is disabled.
Custom Mode Key Management Select the custom values for expert key management.
Table 28. System setup optionsāIntegrated Devices menuī
Integrated Devices
Date/Time Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.
Enable Audio Enable or disable the integrated audio controller.
By default, all the options are enabled.
Serial Port
Serial Port Configuration Enable or disable the serial port address.
By default, the COM1: Port is configured at 3F8h with IRQ4 option is
selected.
USB Configuration Enable or disable booting from USB mass storage devices through the boot
sequence or boot menu.
By default, all the options are enabled.
Front USB Configuration Enable or disable the individual front USB ports.
By default, all the options are enabled.
Rear USB Configuration Enable or disable the individual rear USB ports.
By default, all the options are enabled.
Dust Filter Maintenance Enable or disable the dust filter maintenance.
By default, the Disabled option is enabled.
Table 29. System setup optionsāStorage menuī
Storage
SATA/NVMe Operation Enable or disable the operating mode of the integrated SATA hard drive
controller.
By default, the RAID On option is enabled.
Storage Interface
Port Enablement Enable or disable the onboard drives.
84 BIOS Setup
To Next Page
Loading...
