Table 29. System setup options—Storage menu(continued)
Storage
By default, all the onboard drives are enabled.
M.2 PCIe SSD-0 Enable or disable the M.2 PCIe SSD-0 solid-state drive.
By default, the ON option is enabled.
M.2 PCIe SSD-1 Enable or disable the M.2 PCIe SSD-1 solid-state drive.
By default, the ON option is enabled.
SMART Reporting
Enable SMART Reporting Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.
By default, the OFF option is disabled.
Drive Information
M.2 PCIe SSD-0
Type Displays the M.2 PCIe SSD-0 type information of the computer.
Device Displays the M.2 PCIe SSD-0 device information of the computer.
Drive Information
M.2 PCIe SSD-1
Type Displays the M.2 PCIe SSD-1 type information of the computer.
Device Displays the M.2 PCIe SSD-1 device information of the computer.
Table 30. System setup options—Display menu
Display
Primary Display Determines the primary display when multiple controllers are available on the
computer.
By default, the Auto option is enabled.
Full Screen Logo Enable or disable full screen logo.
By default, the OFF option is disabled.
Table 31. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC Controls the on-board LAN controller.
By default, the Enabled with PXE option is selected.
Wireless Device Enable
WLAN Enable or disable the internal WLAN device.
By default, the WLAN option is selected.
Bluetooth Enable or disable the internal Bluetooth device.
By default, the Bluetooth option is selected.
Enable UEFI Network Stack Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the Auto Enabled option is selected.
HTTP(s) Boot Feature
BIOS Setup 85
To Next Page
Loading...
