Dell OptiPlex Micro Plus 7020 - Page 86

Table 31. System setup options—Connection menu(continued)
Connection
HTTP(s) Boot Enable or disable the HTTP(s) Boot feature.
By default, the ON option is enabled.
HTTP(s) Boot Mode With Auto Mode, the HTTP(s) Boot extracts Boot URL from the DHCP. With
Manual Mode, the HTTP(s) Boot reads Boot URL from the user-provided data.
By default, the Auto Mode option is selected.
Table 32. System setup options—Power menu
Power
USB PowerShare
Enable USB PowerShare When enabled, USB devices connected to the designated USB PowerShare
port on the computer are powered or charged using the stored system battery.
By default, the OFF option is disabled.
Thermal Management Select the heat management settings for the cooling fan and the processor,
with respect to system performance, noise, and temperature.
By default, the Optimized option is selected.
USB Wake Support
Enable USB Wake Support When enabled, you can use the USB devices like a mouse or keyboard to wake
your computer from standby.
By default, the ON option is enabled.
AC Behavior
AC Recovery Allows you to determine what happens when AC power is restored after an
unexpected loss of AC power.
By default, the Power Off option is selected.
Block Sleep Enables or disables the computer from entering Sleep (S3) mode in the
operating system.
By default, the OFF option is disabled.
NOTE: When enabled, the computer does not go to Sleep, Intel Rapid Start
is disabled automatically, and the operating system power option is blank if
it was set to Sleep.
Deep Sleep Control Enable or disable the Deep Sleep mode support.
By default, the Enabled in S4 and S5 option is selected.
Fan Control Override Enable or disable the fan control override feature.
By default, the OFF option is enabled.
Intel Speed Shift Technology Enable or disable the Intel speed shift technology support.
By default, the ON option is enabled.
Table 33. System setup options—Security menu
Security
TPM 2.0 Security
TPM 2.0 Security On Enable or disable TPM 2.0 security options.
By default, the ON option is enabled.
Attestation Enable Enables to control whether the Trusted Platform Module (TPM) Endorsement
Hierarchy is available to the operating system.
86 BIOS Setup