330 Managing Images and Files
Figure 14-9. Image Path
3
View information about the current image.
console#show version
Image Descriptions
image1 :default image
image2 :
Images currently available on Flash
4
Download the image to the switch. After you execute the
copy
command,
you must verify that you want to start the download.
Use either the
active
or
backup
keyword to have the image to replace the
specified image type (which takes effect only after a reboot). In the
following example, the active image is replaced.
console#copy
tftp://10.27.65.103/images/dell_0308.stk active
Mode........................................... TFTP
Set TFTP Server IP............................. 10.27.65.103
TFTP Path...................................... images/
TFTP Filename.................................. dell_0308.stk
------- ------------ ------------ --------------- --------------
unit image1 image2 current-active next-active
------- ------------ ------------ --------------- --------------
1 4.1.0.7 5.0.0.8 image1 image1
To Next Page
Loading...
