Dell PowerEdge R860 - Page 108

Figure 68. Configuration 16: 16 x 2.5-inch (NVMe RAID) with fPERC 12
Table 84. 16 x 2.5-inch (NVMe RAID) with fPERC 12
Order From To
1 SL4_CPU1_PA3 (signal connector on system
board)
CTRL_DST_PA1 (fPERC controller
connector)
2 SL5_CPU1_PB3 (signal connector on system
board)
CTRL_DST_PB1 (fPERC controller
connector)
3 SL1_CPU2_PA1 (signal connector on system
board)
CTRL_DST_PA1 (fPERC controller
connector)
4 SL2_CPU2_PB1 (signal connector on system
board)
CTRL_DST_PB1 (fPERC controller
connector)
5 SIG_PWR_2 (system board power connector) BP _PWR_1 (backplane power connector)
6 SIG_PWR_1 (system board power connector) BP _PWR_1 (backplane power connector)
7 CTRL_SRC_SB1_PB1 (NVMe fPERC controller
connector)
DST_PA2 and DST_PB2 (NVMe backplane
signal connector)
8 CTRL_SRC_SA1_PA1 (NVMe fPERC controller
connector)
DST_PA1 and DST_PB1 (NVMe backplane
signal connector)
9 CTRL_SRC_SB1_PB1 (NVMe fPERC controller
connector)
DST_PA2 and DST_PB2 (NVMe backplane
signal connector)
10 CTRL_SRC_SA1_PA1 (NVMe fPERC controller
connector)
DST_PA1 and DST_PB1 (NVMe backplane
signal connector)
108 Installing and removing system components