This node is changed to online state.
N
ode is going down for reboot.
2. Run the ha status command to verify that the HA pair is back online, and can failover.
HA System Name: datadomain-ha3a.emc.com
H
A System Status: highly available
Node Name Node ID Role HA State
-------------------------- --------- --------- --------
datadomain-ha3a-p0.emc.com 0 standby online
datadomain-ha3a-p1.emc.com 1 active online
-------------------------- --------- --------- --------
3. Optionally run the ha failover command on the current active node to fail the system back to the original active node.
130 Replace the system board
To Next Page
Loading...
