Figure 69. Sliding rail assembly - 2U systems
1
. Sliding rail (2)
2. Velcro strap (2)
3. Screw (4)
4. Washer (4)
The rails are compatible with racks with square holes, unthreaded round holes, and threaded round holes.
The rail kit also includes a unique cable management arm (CMA) bracket assembly that consists of inner and outer brackets, and
screws to attach the brackets to the rails.
Figure 70. CMA brackets
The CMA assembly consists of two articulated arms, and two separators.
Replace the Rail Kit 135
To Next Page
Loading...
