Figure 44. Installing expansion card riser 1
I
nstall the system cover
Prerequisites
Follow the safety guidelines.
Ensure that all internal cables are routed correctly and connected, and that no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the guide slots on the system.
2. Push the system cover latch down.
The system cover slides forward, the tabs on the system cover engage with the guide slots on the system and the system
cover latch locks into place.
3. Using a flat or Phillips head screwdriver, rotate the latch release lock clockwise to the locked position.
90 Replace the HBA330 SAS Controller
To Next Page
Loading...
