Broadcast message from root (Wed Jul 22 17:03:32 2020):
T
he system is going down for reboot NOW!
This node is changed to online state.
Node is going down for reboot.
2. Run the ha status command to verify that the HA pair is back online, and can failover.
HA System Name: datadomain-ha3a.emc.com
H
A System Status: highly available
Node Name Node ID Role HA State
-------------------------- --------- --------- --------
datadomain-ha3a-p0.emc.com 0 standby online
datadomain-ha3a-p1.emc.com 1 active online
-------------------------- --------- --------- --------
3. Optionally run the ha failover command on the current active node to fail the system back to the original active node.
Replace the HBA330 SAS Controller 93
To Next Page
Loading...
