NOTE:
Ensure that the processor and the bracket are placed in the tray before you install the heat sink.
3. I
f you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint-free cloth.
4. Use the thermal grease syringe included with your processor kit to apply the grease in a quadrilateral design on the top of
the processor.
CAUTION: Applying too much thermal grease can result in excess grease coming in contact with and
contaminating the processor socket.
NOTE:
The thermal grease syringe is intended for single use only. Dispose the syringe after you use it.
5. P
lace the heat sink on the processor and push down until the bracket locks onto the heat sink.
NOTE:
● E
nsure that the two guide pin holes on the bracket match the guide holes on the heat sink.
● Ensure that the pin 1 indicator on the heat sink is aligned with the pin 1 indicator on the bracket before placing the
heat sink onto the processor and bracket.
Replace a CPU 99
To Next Page
Loading...
