Dell PowerStore 1000 - Remove the Faulted Dual Inline Memory Module

A
B
1
1
2
2
Figure 199. Removing the Access Module
Remove the faulted dual inline memory module
Steps
1. Locate the faulted DIMM in the Access Module by using the picture below as a reference for orientation.
Figure 200. Top view of the Access Module
NOTE: DIMMs are installed in slots 1 and 4.
2. Depress the retaining tabs downward to free the DIMM from its slot.
3. Remove the faulted DIMM.
168
NVMe expansion enclosure service procedures