Power cooling module
Specifications for the PCM are provided in the following table.
Table 38. 2U Power cooling module specifications
Specification Measurement/description
Dimensions (size) 84.3 mm high x 104.5 mm wide x 340.8 mm long
● X-axis length: 104.5 mm (4.11 in)
● Y-axis length: 84.3 mm (3.32 in)
● Z-axis length: 340.8 mm (37.03)
Maximum output power 580 W
Voltage range 100–200 VAC rated
Frequency 50/60 Hz
Voltage range selection Auto-ranging: 90–264 VAC, 47–63 Hz
Maximum inrush current 20A
Power factor correction ≥ 95% @ nominal input voltage
Efficiency 115 VAC/60 Hz 230 VAC/50 Hz
> 80% @ 10% load > 80% @ 10% load
> 87% @ 20% load > 88% @ 20% load
> 90% @ 50% load > 92% @ 50% load
> 87% @ 100% load > 88% @ 100% load
> 85% @ surge > 85% @ surge
Harmonics Meets EN61000-3-2
Output +5 V @ 42A, +12 V @ 38A, +5 V standby voltage @ 2.7A
Operating temperature 0ºC to 57ºC (32ºF to +135ºF)
Hot pluggable Yes
Switches and LEDs AC mains switch and four status indicator LEDs
Enclosure cooling Dual axial cooling fans with variable fan speed control
Power supply unit
Table 39. 5U84 Power supply unit specifications
Specification Measurement/description
Maximum output power 2,214 W maximum continuous output power at high line voltage
Voltage
● +12 V at 183 A (2,196 W)
● +5 V standby voltage at 2.7 A
Voltage range 200–240 VAC rated
Frequency 50/60 Hz
Power factor correction ≥ 95% @ 100% load
Efficiency
● 82% @ 10% load
● 90% @ 20% load
● 94% @ 50% load
138 Technical specifications
To Next Page
Loading...
