Dell PowerVault Storage Area Network - Connection -Show [-Verbose]

CIFS connection IP addresses : *
CIFS connection Enabled : Yes
CIFS connection status : Available
Display the detailed status of a specific container connection (backup) by defining it by name using the --name backup
command and defining the specific filesystem protocol type (--type nfs) on a DR Series system:
connection --show --name backup --type nfs
Container Name : backup
NFS connection IP addresses : *
NFS connection Root map : root
NFS connection options : rw
NFS connection Enabled : Yes
NFS connection status : Available
Display the complete status of all existing container connections by using the --verbose command on a DR Series
system (this example only shows a partial display of the total output):
connection --show --verbose
Container Entry ID : 1
Container Name : backup
NFS connection Entry ID : 25
NFS connection IP addresses : *
NFS connection Root map : root
NFS connection options : rw
NFS connection Enabled : Yes
NFS connection status : Available
CIFS connection Entry ID : 26
CIFS connection IP addresses : *
CIFS connection Enabled : Yes
CIFS connection status : Available
Container Entry ID : 2
Container Name : _1234
NFS connection Entry ID : 3
NFS connection IP addresses : *
NFS connection Root map : root
NFS connection options : rw
NFS connection Enabled : Yes
NFS connection status : Available
Container Entry ID : 3
Container Name : 12345678
NFS connection Entry ID : 4
NFS connection IP addresses : 10.3.3.3
NFS connection Root map : nobody
NFS connection options : ro
NFS connection Enabled : Yes
NFS connection status : Available
CIFS connection Entry ID : 5
CIFS connection IP addresses : 10.2.2.2,10.3.3.3,10.3.4.4
CIFS connection Enabled : Yes
CIFS connection status : Available
connection --show [--verbose]
Description
Displays the complete status of all container connections on a DR Series system.
Syntax
connection --show --verbose
101