Dell PowerVault Storage Area Network - Replication -Show [-Name <Name>] [-Role <Source | Target>] [-Verbose] [-Limits]

replication --show [--name <name>] [--role <source | target>] [--verbose] [--limits]
Description
Displays a detailed summary of replication-related information for a specific replication container in the DR Series
system.
Syntax
replication --show --name acme-59 --role source --verbose
Result
Replication Container ID : 16
Replication Container : acme55-S2
Replication Entry ID : 8
Replication Role : Source
Replication Target MDS Port : 9915
Replication Target Data Port : 9916
Replication Target System : acme-85
Replication Target System IP : 10.20.22.20
Replication Target Container ID : 14
Replication Target Container : acme85-S2
Replication Enabled : Yes
Replication Compression Enabled : Yes
Replication Encryption : AES 128-bit
NOTE: To see how to display the limits set for the replication containers, see replication --limit --speed
<<num><kbps | mbps | gbps> | default> --target <ip address | hostname>.
replication --show
Description
Displays the current status of all existing replication containers (and respective roles) in the DR Series system.
Syntax
replication --show
Result
Container Name Replication Role Status
acme-59 Source
Enabled
acmeStorage1 Source Enabled
acmeStorage2 Source Enabled
acmeStorage3 Target Enabled
replication --show [--limits]
Description
Displays the limits set for your replication containers on the DR Series system.
Syntax
replication --show --limits
110