Syntax
replication --limit --speed 10gbps --target acme-60
Result
Successfully updated replication limit for acme-60 to 10 Gbps.
Changing traffic control policies ... done.
replication --resync --name <name> --role <source | target>
Description
Resynchronizes the replication process between a source and target container in a replication relationship on a DR
Series system.
Syntax
replication --resync --name dataStorage3 --role source
Result
Successfully initiated replication resync on container dataStorage3.
replication --troubleshoot --peer <ip address | hostname>
Description
Troubleshoots the replication connections between a source and target container on a DR Series system.
Syntax
replication --troubleshoot --peer 10.25.19.5
Result
The following examples shows both successful and unsuccessful replication connection attempts:
Testing connection to port 9904... Connected!
Testing connection to port 9911... Connected!
Testing connection to port 9915... Connected!
Testing connection to port 9916... Connected!
Replication troubleshooting completed successfully - Connection to all ports is
OK!
replication --troubleshoot --peer acme-205
Testing connection to port 9904... Connected!
Testing connection to port 9911... Connected!
Testing connection to port 9915...
Unable to connect to socket - Connection refused
Could not connect to acme-205 on port 9915 - (Connection refused)
Testing connection to port 9916...
Unable to connect to socket - Connection refused
Could not connect to acme-205 on port 9916 - (Connection refused)
replication --help
Description
Displays the list of all replication-related options that can be used as a reference when using the DR4000 system CLI.
114
To Next Page
Loading...
Need help?
General