EasyManua.ls Logo

Dell PowerVault Storage Area Network - Network -Setstatic_Ip -Ip <Ip Address> -Netmask <Netmask> -Gateway <Ip Address

Dell PowerVault Storage Area Network
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
eth1 Speed : 1000Mb/s
eth1 Duplex : Full
eth2 MAC : 00:50:56:93:5A:03
eth2 Max Speed : 1000baseT/Full
eth2 Speed : 1000Mb/s
eth2 Duplex : Full
eth3 MAC : 00:50:56:93:5A:04
eth3 Max Speed : 1000baseT/Full
eth3 Speed : 1000Mb/s
eth3 Duplex : Full
DNS Suffix : storage.local
Primary Nameserver : 10.25.19.15
Secondary Nameserver : 10.25.19.16
network --restart
Description
Restarts the current networking configuration for a DR Series system.
Syntax
network --restart
Result
Shutting down interface eth0: [ OK ]
Shutting down interface eth1: [ OK ]
Shutting down interface eth2: [ OK ]
Shutting down interface eth3: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface bond0:
Determining IP information for bond0... done. [ OK ]
DNS Updated hostname: acme11.storage.local
network --setdhcp
Description
Configures the DR Server system to use the dynamic host configuration protocol (DHCP) form of IP addressing.
Syntax
network --setdhcp
Result
Bond device operation successful. Please run 'network --restart' for the
changes to take affect.
network --setstatic_ip --ip <ip address> --netmask <netmask> --gateway <ip address>
Description
Configures the DR Series system to use a static IP address (and/or configures the corresponding netmask and the
routing gateway for a DR Series system).
36

Table of Contents

Other manuals for Dell PowerVault Storage Area Network

Related product manuals