Steps
1. Align the side cover with the grooves on the chassis.
2. Slide the side cover towards the back of the system to install it.
3. Tighten the thumbscrew (#6x32) to secure the side cover to the system.
Next steps
1. Follow the procedure in after working inside your computer.
Top Cover (side bezel)
Removing the top cover (side bezel)
Prerequisites
1. Follow the procedure in before working inside your computer.
NOTE: Turn the optional SMA antenna downwards or remove it for convenient sliding of the top cover (side bezel).
About this task
The following image indicates the location of the top cover (side bezel) and provides a visual representation of the removal
procedure.
26
Disassembly and reassembly
To Next Page
Loading...
