Dell Precision 3240 Compact - Removing the Hard Drive Bracket

Steps
1. Press the release tabs on the hard drive assembly and slide it towards the front of the system to disconnect it from the
connector on the system board.
2. Lift the hard drive assembly from the system.
NOTE: Note the orientation of the hard drive so that you can replace it correctly.
Removing the hard drive bracket
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the top cover (side bezel)
4. Remove the front bezel.
5. Remove the 2.5 in. hard-drive assembly.
32
Disassembly and reassembly