System board
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the top cover.
4. Remove the SMA antenna
5. Remove the front bezel.
6. Remove the hard drive assembly.
7. Remove the solid-state drive.
8. Remove the WLAN card.
9. Remove the speaker.
10. Remove the fan assembly.
11. Remove the memory modules.
12. Remove the riser card.
13. Remove the heat sink.
14. Remove the interposer module.
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
Disassembly and reassembly
67
To Next Page
Loading...
