Steps
1. Align and place the top cover (side bezel) with the grooves on the chassis.
2. Slide the top cover (side bezel) towards to the front of the system unit to install it.
Next steps
NOTE:
Turn the optional SMA antenna to a convenient angle after safely sliding back the top cover (side bezel) on the
chassis.
1. Follow the procedure in after working inside your computer.
Front bezel
Removing the front bezel
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the top cover (side bezel).
About this task
The following image indicates the location of the front bezel and provides a visual representation of the removal procedure.
Disassembly and reassembly
29
To Next Page
Loading...
