About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
Steps
1. Align and insert the speaker into the slot and press it until the release tab clicks.
2. Connect the speaker cable to the system board.
Next steps
1. Install the front bezel.
2. Install the top cover (side bezel).
3. Install the side cover.
4. Follow the procedure in after working inside your computer.
Fan assembly
Removing the fan assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the top cover (side bezel).
4. Remove the front bezel.
About this task
The following images indicate the location of the fan assembly and provide a visual representation of the removal procedure.
Disassembly and reassembly
39
To Next Page
Loading...
