Dell Precision 3260 Compact - 2.5-inch Hard Drive Assembly

Steps
1. Align the side cover with the grooves on the computer.
2. Slide the side cover into the chassis towards the front of the computer.
3. Tighten the thumbscrew (#6-32) to secure the side cover to the computer.
Next steps
1. Follow the procedure in after working inside your computer.
2.5-inch hard drive
Removing the 2.5-inch hard-drive assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
Removing and installing components
17