Steps
1. Align and insert the speaker into the slot and press it until the release tab clicks.
2. Route the speaker cable through the routing guide on the fan assembly.
3. Connect the speaker cable to the connector on the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in after working inside your computer.
Processor fan
Removing the processor fan
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the speaker.
About this task
The following image(s) indicate the location of the processor fan and provide a visual representation of the removal procedure.
Removing and installing components
29
To Next Page
Loading...
