Dell Precision 3260 Compact - Installing the 2.5-Inch Hard-Drive Caddy

About this task
The following image(s) provides a visual representation of the 2.5-inch hard-drive caddy removal procedure.
Steps
1. Pry the hard-drive caddy to release the tabs on the caddy from the slots on the 2.5-inch hard drive.
2. Lift the 2.5-inch hard drive off the hard-drive caddy.
Installing the 2.5-inch hard-drive caddy
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image(s) provide a visual representation of the 2.5-inch hard-drive caddy installation procedure.
Removing and installing components
19