Steps
1.
NOTE: Unroute the speaker cable from the routing guide on the processor fan.
Press the blue tabs on both sides of the processor fan, and lift the fan to release it from the computer and turn it over.
2. Disconnect the fan cable from the connector on the system board.
3. Lift the processor fan out of the computer.
Installing the processor fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image(s) indicate the location of the processor fan and provide a visual representation of the installation
procedure.
30
Removing and installing components
To Next Page
Loading...
