Dell Precision 3260 Compact - Installing the Graphics Card

About this task
The following image(s) indicate the location of the graphics card and provide a visual representation of the removal procedure.
Steps
1. Pull and open the PCI retainer latch.
2. Slide the graphics card along the edges of the riser card to release it from the riser card.
3. Remove the two (M3x5) screws that secure the riser card to the chassis.
4. Lift the riser card away from the computer.
Installing the graphics card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image(s) indicate the location of the graphics card and provide a visual representation of the installation
procedure.
44
Removing and installing components