Dell Precision 3260 Compact - Removing the M.2 2280 Pcie Solid-State Drive (Slot-1)

3. Install the processor fan.
4. Install the side cover.
5. Follow the procedure in after working inside your computer.
Removing the M.2 2280 PCIe solid-state drive (slot-1)
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the processor fan.
4. Remove the riser card—optional.
5. Remove the hard-drive assembly.
About this task
The following image(s) indicate the location of the solid-state drive and provide a visual representation of the removal
procedure.
Steps
1. Place the computer on its side with the left side facing up.
2. Remove the screw (M2x3.5) that secures the 2280 solid-state drive to the system board.
3. Slide and lift the 2280 solid-state drive from the M.2 card slot on the system board.
36
Removing and installing components