Dell Precision 3260 Compact - Page 25

Steps
1. Place the computer on its side with the left side facing up.
2. Remove the screw (M2x3) that secure the wireless-card shield to the system board.
3. Lift the wireless-card shield out of the computer.
4. Remove the screw (M2x3) that secure the Wireless-card bracket to the wireless card.
5. Slide and remove the wireless-card bracket off the wireless card.
6. Disconnect the antenna cables from the wireless card.
7. Slide and remove the wireless card from the wireless-card slot.
Removing and installing components
25