Next steps
1. Install the display panel.
2. Install the display hinges.
3. Install the hinge caps.
4. Install the display bezel.
5. Install the display assembly.
6. Install the battery.
7. Install the base cover.
8. Install the microSD card.
9. Follow the procedure in after working inside your computer.
Display (eDP) cable
Removing display cable
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the display assembly
6. Remove the display bezel.
Disassembly and reassembly
103
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
