4. Remove the six (M2.5x5.0) display hinge bracket screws that secure the display assembly to the system [1].
5. Lift the display assembly away from the system [2].
Installing the LCD assembly
Steps
1. Place the chassis on a plane surface.
2. Align the display assembly with the screw holders on the system [1].
3. Replace the six (M2.5x5.0) display hinge screws that secure the display assembly to the system [2].
Disassembly and reassembly
75
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
