Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in after working inside your computer.
WLAN card
Removing the wireless card
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Steps
1. Remove the single screw that secures the wlan bracket to the computer [1] and lift the bracket away from the computer [2].
2. Disconnect the two wireless antennas from the wireless card [3] and slide the card out of the connector [4].
30
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
