Next steps
1. Install theWLAN card.
2. Install the battery.
3. Install the base cover.
4. Install the microSD card.
5. Follow the procedure in after working inside your computer.
Keyboard lattice and Keyboard
Removing the keyboard
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the ssd.
6. Remove the ssd bracket.
7. Remove the palmrest bracket.
8. Remove the heatsink.
9. Remove the memory module.
10. Remove the DC-in .
11. Remove the WLAN card.
12. Remove the system board.
78
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
