Next steps
1. Install the system board.
2. Install theWLAN card.
3. Install the Dc-in.
4. Install thememory module.
5. Install the heatsink.
6. Install the palmrest bracket.
7. Install the ssd bracket.
8. Install the ssd.
9. Install the battery.
10. Install the base cover.
11. Install the microSD card.
12. Follow the procedure in after working inside your computer.
Keyboard bracket
Removing the keyboard bracket
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the ssd.
6. Remove the ssd bracket.
82
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
