Next steps
1. Install the palmrest bracket.
2. Install the ssd bracket.
3. Install the ssd.
4. Install the battery.
5. Install the base cover.
6. Install the microSD card.
7. Follow the procedure in after working inside your computer.
Display bezel
Removing the display bezel
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the display assembly
Steps
1.
NOTE: Display bezel cannot be reused after being removed.
Use a plastic scribe to carefully pry open the recesses near the left and right hinges on the bottom edge of the display bezel [1].
88
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
