Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in after working inside your computer.
Solid state drive
Removing the Solid state drive
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Steps
1. Remove the two screws that secure the ssd to computer [1] and slide the ssd module along with the metal bracket from the
connector [2].
32
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
