10. Remove the camera.
11. Remove the display cable.
About this task
After performing the preceding steps, you are left with the display back cover.
Next steps
1. Install the display cable.
2. Install the camera.
3. Install the display panel.
4. Install the display hinges.
5. Install the hinge caps.
6. Install the display bezel.
7. Install the display assembly.
8. Install the battery.
9. Install the base cover.
10. Install the microSD card.
11. Follow the procedure in after working inside your computer.
Palmrest assembly
Replacing the palmrest and keyboard assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
106
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
