Next steps
1. Install the display assembly.
2. Install the battery.
3. Install the base cover.
4. Install the microSD card.
5. Follow the procedure in after working inside your computer.
Hinge caps
Removing hinge caps
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the display assembly
6. Remove the display bezel.
Steps
1. Remove the two (M2x2.5) screws that secure the hinge caps to the chassis [1].
2. Pinch the hinge caps to release the hinge caps from the ribs on the display back cover and then slide inwards to remove the hinge
caps from the display hinge [2].
92
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
