Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in after working inside your computer.
Solid state drive bracket
Removing the solid state drive bracket
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the ssd.
Steps
Remove the single screw that secures the bracket to the computer [1] and lift it out of the computer [2].
34
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
