Dell Precision 3550 - Touchpad Buttons; Removing the Touchpad Buttons Board

Next steps
1. Install the palmrest bracket.
2. Install the ssd bracket.
3. Install the ssd.
4. Install the battery.
5. Install the base cover.
6. Install the microSD card.
7. Follow the procedure in after working inside your computer.
Touchpad buttons
Removing the touchpad buttons board
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the ssd.
6. Remove the ssd bracket.
7. Remove the palmrest bracket.
Steps
1. Disconnect the smart card reader cable and unroute the cable [1,2].
Disassembly and reassembly
61
This manual downloaded from http://www.manualowl.com