Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in after working inside your computer.
Display assembly
Removing the LCD assembly
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the WLAN card.
Steps
1. Un-route the wireless antenna [1].
2. Remove the twp (M2x3) screws that secure the display cable bracket to the computer [2].
Disassembly and reassembly
73
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
