Next steps
1. Install the heatsink.
2. Install the LED board.
3. Install the palmrest bracket.
4. Install the ssd bracket.
5. Install the ssd.
6. Install the battery.
7. Install the base cover.
8. Install the microSD card.
9. Follow the procedure in after working inside your computer.
Coin-cell battery
Removing the coin cell battery
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Disassembly and reassembly
71
This manual downloaded from http://www.manualowl.com