Dell Precision 3550 - Display Back Cover Assembly; Replacing the Display Back Cover

Next steps
1. Install the camera.
2. Install the display panel.
3. Install the display hinges.
4. Install the hinge caps.
5. Install the display bezel.
6. Install the display assembly.
7. Install the battery.
8. Install the base cover.
9. Install the microSD card.
10. Follow the procedure in after working inside your computer.
Display back cover assembly
Replacing the display back cover
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the display assembly
6. Remove the display bezel.
7. Remove the hinge caps.
8. Remove the display hinges.
9. Remove the display panel.
Disassembly and reassembly
105
This manual downloaded from http://www.manualowl.com