Next steps
1. Install the hinge caps.
2. Install the display bezel.
3. Install the display assembly.
4. Install the battery.
5. Install the base cover.
6. Install the microSD card.
7. Follow the procedure in after working inside your computer.
Display panel
Removing display panel
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the display assembly
6. Remove the display bezel.
7. Remove the hinge caps.
8. Remove the display hinges.
96
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
