Next steps
1. Install the SmartCard reader board.
2. Install the keyboard.
3. Install the coin cell battery.
4. Install the system board.
5. Install theWLAN card.
6. Install the Dc-in.
7. Install thememory module.
8. Install the heatsink.
9. Install the speaker.
10. Install the LED board.
11. Install the palmrest bracket.
12. Install the ssd bracket.
13. Install the ssd.
14. Install the battery.
15. Install the base cover.
16. Install the microSD card.
17. Follow the procedure in after working inside your computer.
84
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
