Steps
1. Connect the antenna cables to the WLAN card.
The following table provides the antenna-cable color scheme:
Table 2. Antenna-cable color scheme
Connectors on the WLAN card Antenna-cable color
Main (white triangle) White
Auxiliary (black triangle) Black
2. Align the notch on the WLAN card with the tab on the WLAN-card slot.
3. Slide the WLAN card at an angle into the WLAN-card slot.
4. Place the WLAN-card bracket on the WLAN card.
5. Tighten the captive screw to secure the WLAN-card bracket to the WLAN card.
Next steps
1. Install the base cover.
2. Install the microSD card.
3. Install the SIM card.
4. Follow the procedure in after working inside your computer.
24
Removing and installing components
To Next Page
Loading...
