d. Align the screw holes on the solid-state drive bracket with the screw holes on the system board.
e. Replace the two (M2x3) screws to secure the solid-state drive bracket to the system board.
Next steps
1. Install the base cover.
2. Install the microSD card.
3. Install the SIM card.
4. Follow the procedure in after working inside your computer.
Memory modules
Removing the memory modules
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SIM card.
3. Remove the microSD card.
4. Remove the base cover.
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
Removing and installing components
35
To Next Page
Loading...
