Smart card reader
Removing the smart card reader
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SIM card.
3. Remove the microSD card.
4. Remove the base cover.
5. Remove the WLAN card.
6. Remove the WWAN card.
7. Remove the 3-cell battery or 4-cell battery.
8. Remove the assembly inner frame.
NOTE: For models with smart card reader configuration, the smart card reader is pre-installed in the replacement palm-rest
assembly.
About this task
The following images indicate the location of the smart card reader and provide a visual representation of the removal
procedure.
Removing and installing components
71
To Next Page
Loading...
