About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
Steps
1. Align and place the speakers on the palm-rest assembly.
2. Route the speaker cable through the routing guide on the palm-rest assembly.
Next steps
1. Install the assembly inner frame.
2. Install the 3-cell battery or 4-cell battery.
3. Install the base cover.
4. Install the microSD card.
5. Install the SIM card.
6. Follow the procedure in after working inside your computer.
System board
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SIM card.
3. Remove the microSD card.
4. Remove the base cover.
5. Remove the M.2 2280 solid-state drive or M.2 2230 solid-state drive.
6. Remove the memory module.
60
Removing and installing components
To Next Page
Loading...
