NOTE: For instructions on how to find your computer's IMEI (International Mobile Station Equipment Identity) number,
see the knowledge base article 000143678 at www.dell.com/support.
Next steps
1. Install the base cover.
2. Install the microSD card.
3. Install the SIM card.
4. Follow the procedure in after working inside your computer.
Solid-state drive
Applying the solid-state drive thermal pad
About this task
The following image indicates the re-usable solid-state drive thermal pad.
Steps
NOTE:
While replacing the system board, if a thermal pad is present in the solid-state drive slot, peel and transfer the re-useable
thermal pad to the new replacement system board.
Removing and installing components 27
To Next Page
Loading...
